Virtually every major industry uses water and commercial water heating systems in operating plants or warehouses or factory outlets. Aside from the manufacturing and production aspect, you’ll find service oriented industries such as hospitals, hotels and laundry shops as a major user of heating systems. It has been estimated that a hospitality facility can use as much as 39% of its energy just to heat water.
If in your need to save on energy costs and you’ve decided to buy a new commercial heating system, you would do well to begin by – appraising the needs of your facility with regards to the peak loads, when the current heaters and boilers are used the most, the times when volumes of water consumed goes high, the temperature ranges and how it flows. You should start shopping for a new system only when you’ve educated yourself on the aspects of this subject. Knowing what you need and why, is a great start.
Also, since a commercial water heating system is generally a complicated system, you should take into account, the option of hiring expert advisor, a consultant who can give you credible information on the differences, the benefits, the initial costs and the long term benefits of commercial heating one system from the other. Ask your consultant to give you advice on all aspects of the system, where to place it, what would be suitable for your company and how it answers your needs.
When you’ve done this, you can more easily narrow down from among the many technological options, which commercial water heating system are you bringing home? You can find commercial versions of water heaters as tankless water heating systems, storage water heating systems, and Commercial water heaters are available in storage, instantaneous, heat pump and tankless coil (heat recovery) configurations or indirect heating units. Most commercial water heaters also have hot-water supply boilers. These boilers are configured to supply potable hot water rather than space heating.
Solar heating system – generates heat from the sun’s energy. This can be a good choice, because you harnessing from a renewable source, and while the initial capital investment will be high, the maintenance and operating costs are generally low. There are different solar heating systems available for commercial applications. Some of these systems are:
Glazed Flat-Plate Collectors – the collectors are in an insulated box, to prevent heat loss and they are covered with a sheet of glass. Its tubes are connected to a metal absorber plate.
Evacuated-Tube Collectors – are individually sealed vacuum tubes that surround a metal absorber plate. The tubes act to prevent heat loss effectively. They are effective in cold climates.
The standard commercial heating systems are still all gas driven. This is because they provide a greater quantity of hot water, while operating rather efficiently. The newer models can offer you flexibility with regards to the safety devices, and pumps.
Use a combination of heating And Water Heating Systems – a lot of hotels, motels, restaurants and hospitals use combination heating/hot water systems. The benefits are good, the low costs compared to having separate hot water and heating systems, minimal operating costs, it’s flexible.
Central Heating System with Gas Boilers offer these advantages you may want to consider: no oil tanks to fill up and therefore no worries about potentially harmful oil spills or waste, low operating and maintenance costs. Also, when you replace a gas boiler, you’ll immediately see the cost savings. Then there are multiple, high-efficiency boilers that can be turned on and off, as well as provide an even warm temperature for your building. And with today’s newer models, you can expect these boilers to pass comfortably through door ways.
Remember when you select from many alternate heating sources available, you can buy a commercial heating system that’s right for your budget and facilities’ needs, as well as one that’s energy efficient – all it takes is prior research and some expert advice.